Versatile 12-position pluggable terminal. Use it to connect to our EZIOxx, IOBee and EZFlora units. Can take from 22 to 16 AWG solid wire.

This 24VAC power supply offers a 20VA rating, ideal for controlling irrigation valves when used in conjunction with our EZFlora.

X10 4-unit credit card size controller - Never come home to a dark house again! Four on/off plus dim/bright button pairs. Great to control INSTEON using our EZX10RF all-house transceiver and X10/INST...

Use this indoor/outdoor wireless motion sensor with our EZX10RF - X10 All-House Transceiver and INSTEON Bridge. The ActiveEYE will send an RF signal to the EZX10RF which then sends the signal over t...

Plug this IR emitter into a 2-conductor 3.5mm keystone jack and stick it over the IR eye on your A/V equipment. Control two devices from one output on your IR distribution module. The emitters operate...

Ideal breakout connector for adding a rain sensor or water meter to the EZFlora Irrigation Controller, or to easily connect any sensor to an input device using a pre-terminated patch cable. Allows for...

The EZEye sensor is a high accuracy device that matches the spectral sensitivity of the human eye. This is important when detecting or measuring lighting conditions in places influenced by incandesce...

EZFlora is an 8-zone sprinkler controller that allows direct management of up to 8 irrigation valves (zones) through the convenience of an INSTEON or X-10 home automation network. EZFlora may be set u...

Send your EZFlora to us for a reflash to firmware v28. This upgrade is specifically for ISY users who have been having trouble creating scenes with their EZFlora using the ISY.

The EZIComm is an INSTEON PowerLine Modem, that uses the INSTEON chip from SmartLabs. The unit is functionally equivalent to the SmartLabs 2412S and interfaces to a PC or home automation controller v...

Insteon and X10 Input/Output controller. Now you can put control and sense inputs where you need it, without the wiring limitations imposed by centralized control panels. Two relay outputs rated .5A...

Provides four independently controlled relays usable to control small AC and DC loads. Relays provide normally open and normally closed contacts rated 0.5A @30VDC or 120VAC that can be controlled via...

6-Input Insteon Controller. Four inputs usable for contact closures, switches, digital signals, etc. Two inputs usable for analog signals (0-5VDC.) Can control up to 32 Insteon devices based on the...

Insteon and X10 Input/Output controller. Now you can put relay control and sense inputs where you need it, without the wiring limitations imposed by centralized control panels.

EZIO8SA and PLM package with cables in a complete, money-saving bundle. Ready for operation with everything you need to control loads with 8 relays, and to monitor 7 inputs. Inputs can be: 4 opto-is...

Insteon and X10 Input/Output controller. Now you can put control and sense inputs where you need it, without the wiring limitations imposed by centralized control panels.

Wireless Liquid Detector for use with EZSnsRF or the Dakota Alert 3000 receiver. The unit can be used to detect leaks and unintended liquid accumulation.

Undetected liquid damage, such as that caused by leaking pipes or corroded water heaters, cost homeowners thousand of dollars each year. The EZSnsLQD sensor, together with one of our EZIOxx modules or...

Wireless sensor receiver compatible with Dakota Alert series 3000 transmitter found in driveway alerts, motion sensors and other RF devices. Receives signals from up to 20 distinctly coded transmitte...

EZSrve is a stand-alone home automation gateway that gives you ultimate control of a network of INSTEON and X10 devices from any computer connected to the Internet. The built-in web server allows y...

EZSrve's have a tiny hole on the left that is used only for manufacturer use. Users that play with that and corrupt the EZSrve beyond the ability to factory reset to restore, will need to send the EZ...

Prior to V2.0 the EZSrve is not capable of interfacing with the new Flash-based HarmonyGUI.

In order to take advantage of this new interface, purchase this upgrade and send your device to u...

Discontinued - limited quantities of refurbished units, sold AS IS - 90 day warranty

These EZSwitch30's may not have top and side labels, but have been tested and repaired...

EZUIRT is a multi-functional device that a) converts signals from IR remote controllers into INSTEON and X10, b) converts INSTEON commands into IR signals, and c) distributes the IR signals received t...

This versatile transceiver not only puts all RF X10 addresses into the powerline, but also converts RF and powerline X10 to INSTEON commands. Now you can use readily available and inexpensive X10 tran...

The fully integrated Harmony Gateway bridges modern home automation (HANs) and computer networks (LANs or WANs) and operates independently of a PC. Use it to monitor and control appliances from any ...

The Harmony Platinum gateway provides the bridge between an Ethernet connection and a wireless or hybrid home/building automation network. It is accessible from anywhere including the Internet through...

Heavy-Duty, 24VAC, 40VA transformer with overload protection. Use for sprinkler valves, security panels or HVAC control.

1 set of Normally Open magnetic sensors and 1 set of Normally Closed magnetic sensors. Each sensor set consists of a magnet and a magnetically activated switch.